Alarm Module
The alarm module serves as a monitor to 8 ON/OFF
sensor. Each sensor input can program as normally close or
normally open. If the sensor status is different of the
programmed value, the module gives red and green light and
acoustic alarms indicate the sensor input. The red alarm
continues as long as the input is different from the programmed
value. The acoustic alarm acts as the red light alarm but it
can be muted by using the ACKNOWLEDGE button. If the
sensor status returned to the normal value, the green alarm stays
on to indicate that was alarm in this input. By using the
IN ORDER button, the alarm module will show the last 16
alarm. The RESET button erases all old alarms. The LED Test
used to test the light and acoustic alarms.
