CONTENTS OF THIS ARTICLE
Related Articles:
The up coming channelling has been the most, interesting, frustrating and satisfying articles that I have done so far. Generally, when I channel something a picture is built up over the days, weeks and months. Each day adds and clarifies a new piece of information. Once it has all been compiled I sit down and allow the information to flow through to the computer, via the heart and communications channels.
The Back to Basics series has been a totally new and different process of producing articles. It has been part dissertation; from what I already know, part channelling; through heart from the ancestors, part visionary; images to clarify what was being presented, and part research; searching the internet for scientific and metaphysical principles.
Communicating non verbal technical information into a format that is comprehensible has certainly been a challenge. It has been very difficult to fully understand and articulate in writing the energetic and non physical aspects of creation, such as; densities, higher dimensional realities, dreamtime planes, etc. The main reason for my lack of understanding is because the nature of a holographic creation requires an understanding of holographic communications to translate and interpret what is being communicated. I am just beginning to comprehend LoO, or holographic communications. The Language of Light is a unity based form of communication that is of an electromagnetic nature, and allows one to communicate with higher levels of consciousness, Earth Mother and her kingdoms. I am guided that I have mastered the LOL sufficiently to present information from the ancestors that is relatively free of distortion.
Notwithstanding, I have found that there is usually a certain level of distortion in all information being channelled, irrespective of who that is; that which was yesterday and today may not necessarily be the same tomorrow. Ascension is about change, and as change comes forth and distortion is cleared, clarity prevails. I ask that each challenge the information presented if it does not resonate, this is the only way clarity can be achieved for all.
The back to basics series stemmed from my desire to understand exactly what the nature is of this destructive energy known as "electrical energy". How is it generated?, where did it come from? How does it manifest? This led me on a journey into the fundamental scientific principles of; wave motion, sound resonance, magnetism, frequency, vibration, harmonics, sacred geometry, platonic shapes, symmetry, etc. Many times I was left going Kehhhhh!! These are highly complex topics within themselves, and well beyond my full understanding. The information is presented in a manner that I best understand it, I feel that I have just scratched the surface of the principles presented here. You may like to do your own research on these topics, and there is plenty of information on the internet about these topics.
As such, I would appreciate any comments and feedback from those that may be able contribute to the information presented here, and my understanding of it.
I have decided that it is best to present the technical information as a dissertation of my own research and knowledge, the rest will be presented as channelled. This will enable each to be addressed separately by those that have an interest.
Regards
Ken McKelvie
Firstly I would like to provide a basic understanding of vibration, frequency and harmonics
VIBRATION AND FREQUENCY
In understanding the properties of energy and how it behaves, it is first important to understand the terms vibration, frequency, harmony and resonance. Everything in creation, both animate and inanimate, is made up of moving energy. At the atomic and subatomic level there is movement of energy, wherever there is movement of energy there is vibration, and visa versa. Vibration can be described as a periodic or cyclic motion between two extremes around a mid point, a guitar string for example. When the string is plucked it moves in a cycle between two extremes around a mid point, causing a sound wave to be produced at a particular note, or frequency
The Frequency is how many times, or cycles, that are repeated in one second, and is referred to as Cycles Per Second (Cps). For example, to get note "A" requires 440 cycles per second and this is achieved by tightening or loosening the strings.
By slowing this down to 1 cycle per second (below) it can be seen that the wave motion, called a sine wave, moves through a series of changes between two extremes, passing through a mid point. It can also be seen that there is a + / to show strength or amplitude, which are opposite polarities.
Everything that vibrates resonates at a fundamental or primary frequency, based on the configuration of energy that holds the matter together. A tuning fork is a good example of the precise configuration of matter to achieve a specific sound. A wind chime is also an example of the same material, at different lengths, each having its own unique fundamental frequency and sound. The examples below show various cycles per second, note that the base frequency is called the fundamental frequency. The fundamental frequencies for those shown below would be 1, 2, 3, 4 and 6 cycles per second.
Generally, Cps are expressed in Hertz (Hz), 1 cycle = 1 Hz. One thousand cycles would be 1 Kilohertz (Khz), one million cycles per second would be 1 Megahertz (Mhz), etc, human audio peak for sound is about 20 Khz.
Frequency is generally separated into bands within what is called the visible light frequency spectrum. These bands have a Frequency Range e.g. the High Frequency (HF) spectrum bandwidth is 3Mhz  30Mhz, the Very High Frequency (VHF) spectrum bandwidth is 30  300 Mhz. For the purposes of this article only Cycles Per Second will be used. The Frequency Spectrum moves up through the Visible Light spectrum, into the subatomic vibrational bandwidths and beyond. It is at the subatomic level that kundalini and chi manifest. The energetic pattern radiated by these energies can be readily captured by Kirlian photography and it is now possible to measure and map the movement of Chi energy through meridians.
HARMONICS
A characteristic of energy generated by a vibration is that there will be a number of frequencies appearing up the frequency spectrum at multiples of the fundamental frequency. These are called Harmonics. The fundamental frequency is also the first harmonic.
Fundamental (Cps) 
Harmonics (Cps) 

2^{nd } 
3^{rd} 
4^{th} 
5^{th} 
6^{th} 

2 
4 
6 
8 
10 
12 
3 
6 
9 
12 
15 
18 
4 
8 
12 
16 
20 
24 
5 
10 
15 
20 
25 
30 
6 
12 
18 
24 
30 
36 
In the above example it can be seen that fundamentals share common frequencies at various harmonics e.g. 3 &4 share a common frequency, 12Cps at the 4^{th} & 3^{rd} harmonic. It can be said that at these points they are in harmony and resonate together at a common frequency. The above matrix becomes vastly more complex when all frequencies are considered.
The term sub harmonic is often misused when discussing frequency and harmonics. In a technical and scientific sense there is no such thing as a sub harmonic because fundamentals can only generate harmonics up the frequency spectrum. In the table above it can be seen that 4Cps will generate harmonics at 8, 12, 16, 20Cps etc. What is often called a sub harmonic is in fact a sub multiple of a fundamental or harmonic. Once again, referring to the table above in can be seen that 12Cps has a large a number of sub multiples including; 2, 3, 6 cps. Though sub harmonics cannot be generated naturally oscillators can be used to generate frequencies at the sub multiples that can be mixed with the fundamental, as they will resonate.
Whilst this statement is scientifically true, from an energetic principle it is false. Creational Law states that there is always an equal and opposite movement of energy for everything that is generated. From an energetic perspective there is a sub harmonic generated, that is not measured or captured by science, and in this creation it is generated into the non physical. Why? Because all movements of energy generated in the physical causes an opposite and opposing movement of energy or tone in the non physical; this is the basic nature of polarity in a fractured creation, polarity will always be expressed, in either the physical or non physical.
Frequencies resonate together when they share a common harmonic and are therefore said to be in harmony with each other, or they resonate. The following is an example of mixing frequencies together, in this case a 2Cps tone is mixed with a 24Cps tone, it can be seen that the 24Cps frequency follows the shape of the fundamental 2Cps tone.
If we were to look at this from a frequency spectrum perspective we would see the frequency spikes at 2 and 24 Cps.
DEAD BEAT
When frequencies are mixed together they produce a frequency that is a composite of the whole. If two tones of the same frequency were mixed together, they would resonate. However, if one of the tones is then offset to be 180 degrees out of phase, or polarised opposite, then they would cancel each other out creating a dead beat.
If we knew all the elemental frequencies of all parts of the orange we could develop a mathematical formula that would express the construction of an orange, based upon the frequencies that go to make up the orange's resonant frequency. This is why many are obsessed with the use of mathematics as they see that mathematics can be used to express aspects of creation by way of a formula.
If a tasteless and odourless 3 Cps non resonant toxin is injected into the orange, it would still, look, taste and smell like an orange, however it would be harmful. If one were to look at this from a frequency perspective they would see that a non resonant frequency exists at 3Cps. The solution to get rid of the toxic frequency would be to either remove it, or to apply a frequency of the opposite polarity to cancel it out, or Dead Beat it, which would be the antidote.
THE HUMAN EXPRESSIONEverything in creation vibrates, this includes both ends of the frequency spectrum, which is often termed Polar Opposites, good/bad, saintly/demonic, rich/poor, abuse/honour, Yin/Yang, male/female. It would be true to say that we all sit within the darker denser vibrations in one way or another, and that none are totally isolated from such energies. However, it is also true to say that the spiritual, emotion, mental and physical journey is to transcend the darker vibrations, and to embrace the higher tones of joy, happiness, love and freedom as an expression of one’s experience. The predominant vibration of one’s resonant frequency is based on the power of their thought form; changing thought form will change vibration. It is often said that light cannot shine without the dark, from which it comes.
Another phenomena in the human expression is that of Group Thought or Group Vibration. This is where a group of individuals generate a vibration based upon a common thought or theme such as nationality, sporting clubs, religion/spiritual beliefs, ideology and symbology etc. This group vibration creates an energetic flow, or movement of energy, that embraces all that participate. Usually, these vibrations sit within a defined bandwidth, one will either resonate (tune into) or not, with a particular frequency. Not all willingly participate in a particular group but do so because of the nature of the human dance.
SHAPES, FORMATIONS AND SYMBOLS
Shapes, formations and symbols are known to generate certain vibrations. Conversely, vibrations, or tones, will also generated shapes, formations and symbols. Many of these shapes are often used in connection with spiritual or metaphysical endeavours. To get a visual understanding of how frequency generates shape the reader is asked to check the following link; if you are on dial up it may take a while to watch the whole clip http://www.youtube.com/watch?v=Zkox6niJ1Wc
I would like now to provide a very basic explanation of wave mechanics and vibration to shape relationship. If we were to take a previous example of standing wave created by a guitar and view it on an oscilloscope it will be seen that there is an extreme vertical movement at the top and bottom of the wave. There are also portions of the wave where there is no vertical movement which is at the mid point of the cycle. It has been demonstrated that at these points nodes will be generated, the higher the vibration the more nodes there will be.
Two dimensionally the node concept can be used to describe how geometric shapes, such as a triangle, square, pentagon, hexagon etc, are created when the nodes are joined together by lines. These shapes produce a vibrational resonance that has a basic energetic movement from a two dimensional perspective. When geometric shapes are inscribed within a circle; which is representative of a cycle, unity or completeness, they produce a tone or energetic signature.
These two dimensional geometric shapes are often used for energetic symbology in the metaphysical community to denote a particular spiritual significance of the electrical sacred geometry. In some yogic teachings these geometric shapes also have significance in relation to chakras and colour.
There is also another form of sacred geometry derived from shapes, and this has to do with three dimensional shapes, or formations. These shapes are based upon the triangle, square and pentagon, and are called polyhedrons which are known as Platonic Solids. At the present time there are only five known shapes identified by scientists, and these are the foursided tetrahedron, sixsided cube, eightsided octahedron, twelvesided dodecahedron and twentysided icosahedron. Each of the formations has the same shape on every side, with each line in the formation being the same length, and all the internal angles will be the same. Additionally each formation will fit perfectly inside of a sphere, with all points touching the edge of the sphere without overlaps. It can be seen that the triangle forms the face of the octahedron, tetrahedron and the icosahedron, squares form the face of the cube, and the pentagon the faces of the dodecahedron. What we are basically seeing here are three dimensional representations of vibrational energy in their basic form.
Tetrahedron  Octahedron  Cube  Icosahedron  Dodecahedron
From a three dimensional perspective as the nodes cluster together in a sphere they begin to create 3 dimensional shapes. These shapes are formed in a sphere, just as the two dimensional shapes are formed in a circle. 4 nodes evenly spaced will create a tetrahedron; 6 nodes form an octahedron; 8 nodes form a cube, twelve nodes form a icosahedron and twenty nodes a dodecahedron. The straight lines that can be seen on the geometric shapes represent the stresses that are caused by the closest distance between two points for each of the nodes as they spread themselves across the surface of the sphere.
In relation to polarity every movement of energy generates an opposite and opposing movement of energy, or polar opposite, and this is also the case with Platonic shapes which also have a dual. For every Platonic polyhedron there exists another Platonic polyhedron in which faces and vertices occupy complementary locations, which is known as the dual, or reciprocal. The dual of Platonic solids can be created by connecting the midpoints of the sides surrounding each polyhedron. The term symmetry is used to describe the relationship between the shapes, symmetry can best be described as balance amongst systems, or between parts of systems.
The process of forming duals for the Platonic solids is illustrated below. The top row shows the original solids. The middle row shows the vertex figures of the original solid as lines superimposed on the tangential polygons, forming the corresponding duals. Finally, the polyhedron compounds consisting of a polyhedron and its dual are illustrated in the bottom row.
Please read the following quote:
Both the students of Buckminster Fuller and his protégé Dr. Hans Jenny devised clever experiments that showed how the Platonic Solids would form within a vibrating / pulsating sphere. In the experiment conducted by Fuller’s students, a spherical balloon was dipped in dye and pulsed with “pure” sound frequencies, known as the “Diatonic” sound ratios. A small number of evenlydistanced nodes would form across the surface of the sphere, as well as thin lines that connected them to each other. If you have four evenly spaced nodes, you will see a tetrahedron. Six evenly spaced nodes form an octahedron. Eight evenly spaced nodes form a cube. Twenty evenly spaced nodes form the dodecahedron, and twelve evenly spaced nodes form the icosahedron. The straight lines that we see on these geometric objects simply represent the stresses that are created by the “closest distance between two points” for each of the nodes as they distribute themselves across the entire surface of the sphere.
Sacred Geometry in the Quantum Realm
The relationship between the polyhedrons and structure of crystals and minerals is well known. Table salt is an example of how two different elements, sodium and chloride bond together to form a Platonic Solid of the Cube. Though water is not a crystal in the liquid state, the water molecule is made up of two hydrogen and one oxygen atom that form together in the shape of a tetrahedron. Another example is fluorite crystals which form the octahedron, basically all crystalline structure in creation has a molecular structure based upon either the tetrahedron, cube and octahedron. All these crystalline structures are capable of conducting "electricity" to some degree or another. There is no known natural mineral or molecule that exhibits the properties of the icosahedron or the dodecahedron, whilst these shapes have symmetry they do not have periodicity, (don’t ask!!! Too hard to explain, google it), as crystal formations. However, scientists have been able to manufacture material that has icosahedron or the dodecahedron structures. These crystals are often called quasi crystals, material made with this structure has an extremely high strength, resistance to heat and will not conduct electricity. An example of two such materials are aluminiumcopperiron quasicrystal alloy, which has the dodecahedron shape, and aluminiumcobaltnickel alloy which has the shape of a decagonal 10 sided prism.
Platonic Shapes and sacred geometry has expressed across nearly all aspects of the metaphysical community. It has often been said that the Platonic Shapes represent following elements:
Tetrahedron  Fire
Cube  Earth
Octahedron  Air
Icosahedron  Water
Dodecahedron  Ether (though this is not mentioned literature ancestors provided this information)
CONCLUSIONThe node principle is represented in a number of the LoO symbols. In particular Holographic Field Rotation, which represents the building of 12 nodes, strands, or light body segments, with the centre point node being soul infusion. Another is the LoO symbol of Holographic Flow which shows that creation is modulated by 6 sweeping arms, bandwidths or densities. The large nodes represent the 6 base tones, and the smaller nodes represent the harmonics and sub harmonics that make up the frequency spectrum for each density. The Ancestors, Magpie and Mineral Kingdom will be exploring these and many other concepts in the upcoming articles.
Manymak (mainmak), Yolgnu for; everything is good, every thing is as it should be, or OK
Ken
UPDATE SEPTEMBER 2006: Magnetricity: the Magnetic Atom